Danfoss radiatortermostat manual

In the unlikely event of water hammer being encountered turn the setting ring (see diagram 4) to the other setting. Alternatively if commissioning the whole system, establish the flow direction through each valve using the diagrams below. If the flow direction needs to be changed there is no need to remove . Now with unique flow selectable bi-directional valve - Now also available in a Straight pattern - New style sensor, compact and easy to fit no tools required - Available in convenient combi packs - Radiator. Number and number represent pointers.

Depending on how you look at the valve you turn handle with numbers and on dial to align with pointers. You have to align number on scale with pointer or number on scale to align with pointer 3. These scales are identical and you can use either one . Congratulations on purchasing your Bosch Smart Home Radiator Thermostat. From this point, the app guides you through the installation process. You will find a brief description in the following pages of this instruction manual.

Living Connect is a Z-Wave controlled electronic radiator thermostat. It is mounted on wall heating valves and controls them by a motor. The device accepts a setpoint that is either set manually using buttons on the device or wirelessly using Z-Wave.

Afterwards, the device will regulate the warm water supply to the wall. Danfoss Heating Solutions. The setting knob is used to manually open and shut radiator valves. Setting knobs are available in white and.

To remove the thermostat turn the base counter-clockwise. This will also reset the the snap-action mechanism when an audible click is heard. Ordering and technical data. The cap must not be used as a manual shut of device.

RAS-Csensors incorporate a “ Frost Protection”. Do not leave packaging material lying aroun as it can be dangerous in the hands of . Carefully read all instructions before setting up the device and store the instructions for later reference. Use the Home Control Radiator Thermostat as described in these instructions and in the Home Control online help to prevent damage.

The Popp radiator thermostat can be mounted to valves with standard M30x1. Central Controller) or a Z-Wave certified controller. A Z-Wave controller will have access to all living . The valve is supplied with a protective cap, which can be used for manual regulation dur- ing the construction phase.